The Expanse collection was launched in the last days of Eaglemoss and had only limited distribution. The first model was an XL version of the series' main ship — the Rocinante, a Martian corvette that ended up under the charge of James Holden.

The Eaglemoss model measures 12.8 inches (32.5 cm) long and comes in its original box.

This is a replica of the original stargate from Stargate SG-1, also known as the Alpha Gate. The gates were developed over 50 million years ago by the Ancients and can be used to open wormholes between different planets and even different galaxies. The Ancients called them Astria Porta and seeded them throughout the Pegasus and Milky Way galaxies. When the Goa'uld took control of them they called them Chappa'ai, which Daniel Jackson translated as "stargate".

The gate used by SG-1 was buried by the ancient Egyptians after they overthrew the Goa'uld Ra. It was uncovered in 1928 and was eventually powered up at a secret facility in Cheyenne Mountain. It has nine chevrons and 39 glyphs that can be used to dial the address of thousands of inhabited planets.

The model is made of a high quality polystone, which holds the detail exceptionally well. The gate itself has a diameter of 9.25 inches (23.5 cm). It is an individual piece that can be slotted into the display stand, which bears the SG-1 symbol from the planet Earth.

The F-302 fighter interceptor was Earth's first fighter designed to operate in space. It was developed using alien technology that was acquired through the use of the stargates, and was armed with railguns and guided missiles. It had a hyperdrive and could make interstellar journeys.

Length: 4 inches (10 cm); Width: 8 inches (20 cm)

When Battlestar Galactica returned in 2004, it was with a redesigned ship that cleverly echoed the original. Seen from the side, Eric Chu's design looks radically different, but when turned around, the familiar shapes of the classic version are evident in the design.

In the series, the Galactica is a relic of an earlier age, but its primitive technology allowed it to survive the Cylon attack to become humanity's flagship.

The model measures just over 10.5 inches (27 cm) long.

The Koto was an MCRN patrol destroyer that was illegally sold to Marco Inaros and became part of the Free Navy. It was one of several ships that attacked the Rocinante in the episode 'Hard Vacuum', when it was disabled by an attack from Drummer's ship.

The Koto was designed by Ryan Dening, who also designed many ships for Star Trek.

It was produced but never sold by Eaglemoss and we have acquired all the stock. Length approximately 9 inches (22 cm).

The Puddle Jumpers were Ancient ships that were used to fly through the Stargates to different locations in the Pegasus Galaxy. The Master Replicas model is based on the original VFX files that were used on Stargate Atlantis.

The model itself is just under 6 inches (15 cm) long.

Bilskirnir is Thor’s ship, which made its debut in the Stargate SG-1 season 2 episode ‘Thor’s Chariot’, when it saved SG-1 from the Goa’uld. Bilskirnir was an incredibly powerful Asgard mothership with advanced transporter systems, engines that could cover intergalactic distances in hours, and an ion gun that could obliterate a Goa’uld Hat’tak ship.

In Norse mythology 'Bilskirnir' refers to Thor’s hall, where he lived with his wife Sif and their children.

The Master Replicas die-cast model is 15cm long and is based on the original VFX model, which was supplied to us by the production team.

The Razorback started life as Julie Mao's racing ship. Avasarala and Bobbie use it to escape from the Guanshiyin before Bobbie ends up owning it. She uses it to investigate the missing Martian ships, which she discovers have been sold to the Free Navy.

The Eaglemoss model is 7.25 inches (18.5 cm) long.

The Daedalus was the first BC-304 interstellar battleship that was produced by Earth. It was armed with railguns and tactical warheads and carried a wing of F-302 fighters.

It was also the first Stargate ship that was produced by Eaglemoss. The initial run sold out quickly. A second wave was made but Eaglemoss's difficulties meant that it wasn't shipped. It has been changing hands on ebay for incredible prices.

The ship measures 8.85 inches (22.5 cm) long.

The ships in The Expanse rely on an Epstein drive to reach the kinds of speed that make interplanetary travel practical. The drive was first tested on a second-hand yacht, and was discovered almost by accident.

This is one of the last models that Eaglemoss produced and we have them all.

Yacht length: 6 inches (16 cm); width: 4.7 inches (12 cm); height: 4.3 inches (11 cm).

The XL USS Orville from Seth McFarlane's sci-fi series.

Eaglemoss only released a limited number of ships from the series, and this is the XL version of the hero ship.

The model is approximately 10.25 inches (26 cm) long.

This model, from Battlestar Galactica: Blood & Chrome shows the Galactica in its prime during the First Cylon War, when it had more gun turrets and heavier armor plating.

The Eaglemoss model is just over 10.5 inches (27 cm) long.

Destroyers were a pivotal part of the Krill military. A destroyer engaged enemy ships in direct combat, and its bombing capabilities made the ship the ideal choice to attack colony planets from space.

Yet destroyers were more than simple attack ships: the Krill designed them to host entire families, providing living arrangements, religious sanctuaries, and classrooms for children.

The model is approximately 8.66 inches (22 cm) long.

RARE SITE EXCLUSIVE The Kaylon Interceptor from The Orville is the smaller ship with a 'tail' that was carried inside the Kaylon sphere.

The model is just under 7 inches (17.5 cm) long. 

In the reimagined Battlestar Galactica the design of the Cylon Basestar was completely reworked. The new Basestar was an organic spaceship that was as much a being as a vehicle. It was controlled by a hybrid that could perceive things outside normal reality.

The new version was designed by artists Gary Hutzel and Eric Chu, who saw it as more advanced than the human ships.

The Eaglemoss model measures 10.25 inches (26 cm) across.

For its third season The Orville got a new shuttle that looked sleeker and more aggressive than its predecessor.

The model is 7 inches (18 cm) long

To celebrate the 25th anniversary of The Matrix, Master Replicas are releasing an incredibly detailed die-cast model of Morpheus's ship The Nebuchadnezzar.

When The Matrix was released in 1999, the Wachowskis changed cinema forever. Sci-fi had never been cooler. The original movie played with huge ideas as Morpheus and his allies freed Neo from his mundane reality and introduced him to the truth: a world where the machines have subjugated humanity.

The Nebuchadnezzar, which was designed by concept artist Tani Kunitake, was at the heart of the story. The Neb was a rusting hovercraft that used EM pulses to protect itself from the machines, as Morpheus and his crew managed to stay one step ahead of the robotic Sentinels.

This impressive die-cast model has been digitally sculpted before being cast in zinc alloy and ABS, and painted by hand. It has been officially licensed by Warner Bros. and is a true collectors item.

The ship measures 11.8 inches (30 cm) long.

Ridley Scott's classic film Alien opens with a shot of the USCSS Nostromo tugging a massive refinery through space, before the crew are awakened and sent to investigate an alien life signal. What followed is a true sci-fi classic. The Nostromo was designed by legendary concept artists Ron Cobb and Chris Foss.

This is Eaglemoss's XL version which comes in premium packaging and measures just under 10.5 inches (26.5 cm) long.

The Viper MK VII was the modern design of fighter that was in service when the Cylons launched their attack on the 12 Colonies. It had the same basic layout as earlier models of Viper but its computer systems were vulnerable to Cylon attack. After they escaped, both the Galactica and Pegasus produced versions without the vulnerable computer systems.

The Eaglemoss model measures just over 10.5 inches (27 cm) long and features Captain Lee Adama's "Apollo" call sign on the hull.