HOT DOG VARIANT LIMITED TO 750

The modern Viper is a careful update of Ralph McQuarrie's original design that was created for the 2004 reimagining of Battlestar Galactica. Writer and producer Ron D. Moore wanted to make the show about life on an spaceborne aircraft carrier and the Vipers and their pilots were central to his plans.

The Eaglemoss model bears the call sign "HOT DOG" for pilot Lt. Brendan Constanza, and is 10.6 inches (27 cm) long.

The Sphere, or Cruiser, was the Kaylon's main attack ship. Each Cruiser was equipped with one Interceptor, which served as an auxiliary craft. All spheres were equipped with highly advanced technology, a single central cannon with impressive firepower and a hull that resisted target-locking.

Cruisers are capable of sustained quantum travel at 35 lightyears per hour.

The model is just under 7 inches (17.5 cm) across.

This version of the U.S.S. Enterprise made its debut at the end of Star Trek: Discovery's first season before going on to star in Star Trek: Strange New Worlds where it is commanded by Captain Pike.

The ship is a reimagining of Matt Jefferies' original design combined with elements of the motion picture version of the Enterprise and some subtle nods to the NX-01. It was designed by John Eaves, Scott Schneider and William Budge.

The model is part of Master Replicas new range of 4 to 5-inch long models, and is accompanied by a 48-page book, which slides into the base to make a display.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

This is a preorder that will be shipping in July 2025.

Special Shipping Rate. USA $8.99 (for up to three models). UK £3.99.

The Union Fighter PT-197, better known as the Pterodon, is a super-sleek one-man fighter, which made its debut at the beginning of the third season of The Orville. It was part of a new fleet of fighters that was introduced in the aftermath of the Kaylon War. It is incredibly maneuverable and, as Gordon will tell you, a hell of a lot of fun to fly.

The model, which measures just under 9 inches (22 cm)nose to tail, is made of die-cast and is based on the original CG model that was created for the show. It has never been available before.

Shipping From December 2024

EXCLUSIVE LIMITED EDITION Eaglemoss RED model of the light cycle from the 1982 movie Tron. The model is 8.7 inches (22 cm) long and is available here for the first time.

Battlestar Galactica's Raptors were the equivalent of helicopters and were used for reconnaissance and transport missions. They were capable of faster-than-light travel and surface exploration.

The ship was designed and built as a life-size model by Ken Rabehl of the BSG art department, the robust model was big enough to accommodate five people and could be used on location.

The Eaglemoss model is just under 9 inches (22.5 cm) from front to back.

In the 2004 reimagined Battlestar Galactica, the fleet was regularly menaced by Cylon Raiders, which mounted strafing attacks on the human ships. The Cylon ships had a low level of sentience, which the show's creator Ron D. Moore likened to that of a horse.

The menacing design was created by concept artist Eric Chu, who gave it echoes of the design for the Cylon Centurion.

The Eaglemoss model is 10.6 inches (27 cm) long.

One of the last models Eaglemoss released was the light cycle from the classic 1982 movie 'Tron'. This is the blue version. The red, yellow and orange versions were also released in a limited edition. The film used groundbreaking effects techniques and the cycles themselves were designed by the legendary Syd Mead, who is famous for his work on 'Blade Runner' and 'Aliens'. The Eaglemoss model is 8.7 inches (22 cm) long.

The Heavy Raptor is a compact, FTL-equipped craft designed for both atmospheric and space-based operations. This version is more heavily armed than the standard version with twin missile launchers mounted just behind the the cockpit.

The model is 8.85 inches (22.5 cm) long.

The Stargate Death Glider was one of the very last models that Eaglemoss produced.

It was a small fighter created by the Goa'uld that could operate in space or in a planet's atmosphere, and was often used to intimidate and control the Goa'uld's human subjects.

The model has a wingspan of just under 8 inches (20 cm).

The original series Cylon Baseships consisted of twin discs built around a central column. They served as both heavily armed warships and carriers for the smaller Cylon Raiders. They were designed by legendary concept artist Ralph McQuarrie, who worked on Battlestar Galactica after his concept work for Star Wars.

The model measures approximately 6 inches (15.5 cm) across.

The Osiris dates from the first Cylon War and was part of the fleet that featured in Blood & Chrome. It was a stealth frigate, or pocket battleship. The original VFX model was designed by concept artist Richard Livingston.

The Eaglemoss model is just over 10.5 inches (27 cm) long.

When the big screen version of Star Trek was rebooted in 2009, the creators redesigned the Enterprise to look sleeker and sexier than ever. As director JJ Abrams said, this was the "hotrod" version of the ship. This version also appeared in Star Trek: Into Darkness before it was modified for Star Trek Beyond.

This Enterprise was designed by Ryan Church, who is famous for his work on the Star Wars movies.

The model is part of Master Replicas new range of 4 to 5-inch long  die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

This is a preorder that will be shipping in July 2025.

Special Shipping Rate. USA $8.99 (for up to three models). UK £3.99.

Scar was one of the deadliest Cylon Raiders. It had gained experience as a result of being killed and resurrected many times, and grew more cunning with each resurrection. Starbuck set out to kill it, but was only able to achieve her mission with help from Kat.

Scar measures approximately 10 inches (25.4 cm) in length.

This version of the Viper appeared in the TV movie Blood & Chrome, which showed us a pivotal battle in the First Cylon war. The design is close to the version that artist Ralph McQuarrie designed for the original 1978 series, but was made more muscular and upgraded for modern audiences.

The Eaglemoss model is just under 10.5 inches (26.5 cm) long.

In Alien Resurrection the Betty is Frank Elgyn's smuggling ship, which he uses to deliver a group of kidnapped colonists to the USM Auriga, where the scientists plan to use them as hosts for the xenomorphs. Ths Betty was designed by Jim Martin (best known for desgining Star Trek's U.S.S. Defiant).

The Eaglemoss model is 7 inches (18 cm) long and 7.75 inches (19.5 cm) wide.

Since the first season of The Expanse the Rocinante has been at the heart of the action. It is an MCRN Corvette that was carried aboard the Martian navy flagship, the MCRN Donnager. After Holden and his crew took control they renamed it the Rocinante and it became their home.

In the real world the Roci was designed by Ryan Dening, who also worked on Star Trek.

This is the smaller of the two Eaglemoss versions, and it is 8.5" and (21.5 cm) long..

This version of the Raider was seen in the TV movies Blood & Chrome and Razor. It was the design that was used in the First Cylon War and was an updated version of Ralph McQuarrie's mechanical original, which the production team redesigned to look more advanced.

The model has a wingspan of 7.5 inches (19 cm).

The prestigious Viper Mark One (also referred to as the Starhound Class Viper) is the first model of the Colonial Viper space superiority fighter line. The Mark One first entered military service shortly before the first Cylon war as a pre-emptive counteraction against the now independent Cylon Fleet

The ship is 10.5 inches (26.8 cm) in length.