In the 2004 reimagined Battlestar Galactica, the fleet was regularly menaced by Cylon Raiders, which mounted strafing attacks on the human ships. The Cylon ships had a low level of sentience, which the show's creator Ron D. Moore likened to that of a horse.

The menacing design was created by concept artist Eric Chu, who gave it echoes of the design for the Cylon Centurion.

The Eaglemoss model is 10.6 inches (27 cm) long.

One of the last models Eaglemoss released was the light cycle from the classic 1982 movie 'Tron'. This is the blue version. The red, yellow and orange versions were also released in a limited edition. The film used groundbreaking effects techniques and the cycles themselves were designed by the legendary Syd Mead, who is famous for his work on 'Blade Runner' and 'Aliens'. The Eaglemoss model is 8.7 inches (22 cm) long.

The Heavy Raptor is a compact, FTL-equipped craft designed for both atmospheric and space-based operations. This version is more heavily armed than the standard version with twin missile launchers mounted just behind the the cockpit.

The model is 8.85 inches (22.5 cm) long.

The Stargate Death Glider was one of the very last models that Eaglemoss produced.

It was a small fighter created by the Goa'uld that could operate in space or in a planet's atmosphere, and was often used to intimidate and control the Goa'uld's human subjects.

The model has a wingspan of just under 8 inches (20 cm).

Eaglemoss made replicas of the dedication plaques found on the bridge of Starfleet ships. This plaque is for Captain Archer's ship - the Enterprise NX-01, and features the ship's motto 'to boldly go where no man has gone before.'

The Eaglemoss plaques are designed to be displayed on a wall or on a shelf, and measure approximately 10.25 inches (26 cm) across.

This action figure shows Admiral Jean-Luc Picard in his civilian clothes, armed with a phaser, as he visits the U.S.S. Titan NCC-80102-A in the third season of Star Trek: Picard

The figure is 4.5 inches (11.4 cm) tall. The accessories also include a PaDD. It is part of a new series that features characters from all the modern Star Trek shows.

This is a preorder that will be shipping in the third quarter of 2025.

Special Shipping Rate. USA $7.99 (for one or two figures). UK £3.99.

This is Master Replicas first ever Doctor Who ship: the Dalek saucer from 2005's 'The Parting of the Ways'. This impressive polyresin model is 21 cm across and was sculpted by Dalek expert Gavin Rymill. The Daleks used saucers with a similar design in the TV Century 21 Dalek comic strip, but in the 1960s TV budgets didn't stretch to expensive spaceship models. The classic Dalek ship only made its debut in 2005 when a massive fleet of Dalek ships prepared to invade Earth. The ship was made as a 3D CG model by the Mill. Master Replicas recruited Dalek expert Gavin Rymill to recreate the ships using renders made at the time and careful study of the episodes. 

The original series Cylon Baseships consisted of twin discs built around a central column. They served as both heavily armed warships and carriers for the smaller Cylon Raiders. They were designed by legendary concept artist Ralph McQuarrie, who worked on Battlestar Galactica after his concept work for Star Wars.

The model measures approximately 6 inches (15.5 cm) across.

A Time Lord, best friend

The Doctor‚ robotic dog K9 is easily one of the series most popular companions. ¬†Eaglemoss developed but never released a 1:4.5 scale version of K9. The figurine, which stands 16.5 cm tall, shows the Mark I version of K9, which made its debut in The Invisible Enemy and proved so popular that he ended up travelling with Tom Baker‚ the Fourth Doctor for the next four years. He was nearly given his own spin off with Sarah-Jane. He even returned in 2006 to help the Tenth Doctor fight the Krillitane.

The Osiris dates from the first Cylon War and was part of the fleet that featured in Blood & Chrome. It was a stealth frigate, or pocket battleship. The original VFX model was designed by concept artist Richard Livingston.

The Eaglemoss model is just over 10.5 inches (27 cm) long.

This action figure shows Lt. Spock as portrayed by Ethan Peck in Strange New Worlds. He carries a phaser and tricorder.  The figure is 4.5 inches (11.4 cm) tall. and is part of a new series that features characters from all the modern Star Trek shows.

This is a preorder that will be shipping in the third quarter of 2025

Special Shipping Rate. USA $7.99 (for one or two figures). UK £3.99.

The bridge of every Starship has a dedication plaque that records where it was built and when it entered service, and lists its class, registry and motto.

Eaglemoss produced a series of plaque replicas, designed to be hung on a wall or displayed on a shelf.

This plaque replicates that of the Crossfield-class U.S.S. Discovery and features the motto "All things can be understood once they are discovered; the point is to discover them."

The plaque measures approximately 9 inches (22 cm) across.

The 2004 series of Battlestar Galactica upgraded all the elements of the show, including the Cylons themselves. The modern version of the Centurion was a fully-CG creation that took the series' effects to a new level. In the show, the Centurions were ruthless killing machines with limited intelligence and self awareness.

The statue stands 7.5 inches (19 cm) tall.

Eaglemoss Hero Collector Star Trek: The Next Generation Chibi Pin Badge Gift Set.

Introducing the Star Trek: The Next GenerationChibi Pin Badge Box set - a chibi-patterned box set: a collection of seven high-quality metal pin badges, depicting the main cast of Star Trek: The Next Generation.

The box set includes Captain Jean-Luc Picard, William T. Riker, Mr. Worf, Commander Data, Beverley Crusher, Geordi LaForge and Deanna Troi.

When the big screen version of Star Trek was rebooted in 2009, the creators redesigned the Enterprise to look sleeker and sexier than ever. As director JJ Abrams said, this was the "hotrod" version of the ship. This version also appeared in Star Trek: Into Darkness before it was modified for Star Trek Beyond.

This Enterprise was designed by Ryan Church, who is famous for his work on the Star Wars movies.

The model is part of Master Replicas new range of 4 to 5-inch long  die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

This is a preorder that will be shipping in July 2025.

Special Shipping Rate. USA $8.99 (for up to three models). UK £3.99.

Scar was one of the deadliest Cylon Raiders. It had gained experience as a result of being killed and resurrected many times, and grew more cunning with each resurrection. Starbuck set out to kill it, but was only able to achieve her mission with help from Kat.

Scar measures approximately 10 inches (25.4 cm) in length.

This action figure shows Ensign Beckett Mariner when she was a junior officer on the U.S.S. Cerritos in the series Star Trek: Lower Decks.

The figure is 4.5 inches (11.4 cm) tall. The accessories also include a phaser and PADD. It is part of a new series that features characters from all the modern Star Trek shows.

This is a preorder that will be shipping in the third quarter of 2025.

Special Shipping Rate. USA $7.99 (for one or two figures). UK £3.99.

This version of the Viper appeared in the TV movie Blood & Chrome, which showed us a pivotal battle in the First Cylon war. The design is close to the version that artist Ralph McQuarrie designed for the original 1978 series, but was made more muscular and upgraded for modern audiences.

The Eaglemoss model is just under 10.5 inches (26.5 cm) long.