Our largest Eagle yet, and the only one that comes with booster engines — four separate modules, magnetically attached, exactly as Alan fitted them in “New Adam, New Eve”. It arrives with its own landing pad and a Moon Buggy: a whole corner of Moonbase Alpha, not just the ship. In the second season story, an incredibly powerful being called Magus kidnaps a team from Moonbase Alpha and prevents the Eagles from taking off to rescue them. Alan’s answer is to fit Eagle One with four additional booster engines, significantly increasing its power. This model recreates that ship — one of the most distinctive Eagle configurations the series produced. Specification Length — 30 cm (roughly 12 inches) Tooling — Sixteen 12 Pod — standard detachable pod included Boosters — four side booster rockets, 6 cm each, attach to the transporter pod with a magnetic plate, display with or without Materials — a mix of die-cast and injection-moulded parts Launch platform — included, a section of Alpha landing pad with surface markings and raised perimeter Also included — a Moon Buggy, separate and removable Heritage — an updated version of the 30 cm die-cast Eagle first released in 2004 Availability — pre-order, shipping February 2027

This is a light-up replica of the Master Systems Display (MSD) on the Galaxy-class U.S.S. Enterprise NCC-1701-D — the famous cutaway of the ship that appeared throughout Star Trek: The Next Generation. This upgraded version of the artwork was created by Geoff Mandel, who is a veteran of the Star Trek art department.

The artwork is visible when the power isn’t on, but comes to life when you push the button on the side. It works in a very similar way to the real displays used on the show, with backlit film.

Turn your desk into the command deck of a Klingon K’t’inga-class battlecruiser with this extra-large desk mat, designed to sit under your keyboard and mouse. The mat uses authentic Klingon console artwork, which was created by Geoff Mandel for the Star Trek: Voyager episode “Prophecy”. The artwork gives you a chance to examine a screen-used graphic up close and personal, and it’s hard to resist working the controls as if you were commanding the ship yourself.

This is part of our new series of briefing packs that give a unique insight into Star Trek ships. This is the first of a new style of briefing pack that features oversized sheets with detailed isometric drawings of key locations and equipment using the original 3D files created by the Star Trek art department.

The U.S.S. Titan NCC-80102-A pack consists of detailed sheets covering exterior views of the ship that featured in Star Trek: Picard, the main bridge, bridge seating and consoles, observation lounge, turbolift, sickbay, stasis chamber, transporter room, crew quarters, replicators, EPS room, Klingon cloaking device, and the Brig.

The U.S.S. Enterprise NCC-1701-G — a screen-accurate die-cast model with a 48-page collector book.

At the end of Star Trek: Picard, the ship that had served as the U.S.S. Titan-A was renamed in honor of the most famous name in Starfleet — becoming the U.S.S. Enterprise NCC-1701-G. Command passed to Captain Seven of Nine, with Ensign Jack Crusher at the conn.

Why you'll love it

• The legendary name reborn — Seven of Nine's ship, and a new crew for a new era.
• The 48-page collector book — profiles the Enterprise-G and how it carries the Enterprise legacy forward. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

The U.S.S. Titan-A from Star Trek: Picard — a screen-accurate die-cast model with its own 48-page collector book.

The Titan-A carried Jean-Luc Picard and William Riker through the third and final season of Star Trek: Picard, under Captain Liam Shaw and with Commander Seven of Nine at his side, and survived a last confrontation with the Borg. At the end of her mission she was given a new name and registry — becoming the U.S.S. Enterprise NCC-1701-G.

Why you'll love it

• Straight from Picard's final season — the ship at the center of the story, and the future Enterprise-G.
• The 48-page collector book — profile, annotated plans and the making of Star Trek: Picard, with behind-the-scenes photography and concept art. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

Battles in Time presents the next in its line of limited-edition collector's cards focused on the individual Doctors, their companions and their greatest foes. Each set of 15 cards comes in a special collector's pack that is guaranteed to contain every card. The Second Doctor set features companions Jamie and Zoe, the TARDIS and Brigadier Lethbridge-Stewart, alongside nine terrifying monsters including a Yeti, an Ice Warrior, the Cybermen and the Dalek Emperor, plus rogue Time Lord the War Lord. Hidden inside one in every ten collector's sets is the rarest card Battles in Time has ever produced: a metal vortex card, in a super limited edition of just 100 worldwide. Only a hundred collectors will ever own one — and there is no other way to get it. The Second Doctor cards are printed in the original black and white on silver foil, in strictly limited-edition sets of 1,000 pieces worldwide. These cards are not available anywhere else.

"The latest Stargate desktop replica is an incredibly detailed replica of the helmet worn by Anubis’s Jaffa guards. Anubis was one of the most dangerous system lords. Centuries ago, he killed his master Apep and set himself up as the Emperor of the Goa’uld. This led to a civil war, which ended when Ra overthrew Anubis and banished him. At the turn of the 21st century Anubis returned to assume command of the Goa’uld. Anubis was known as the jackal god and this was reflected in the design of the helmets worn by his Jaffa. The helmets were only actually seen in the movie and at the end of Season 8 when they were worn by Jackal guards in Ra’s service. The replica helmet was digitally sculpted, based on careful study of the original props. It has been cast in polyresin to ensure a high level of accuracy, before being painted. The helmet is the perfect size to sit on a desk or shelf and is just under 6” (15 cm) tall when displayed on its bespoke stand."

In Gerry Anderson’s UFO the interceptors were one-man fighters that were S.H.A.D.O.’s first line of defense against the alien UFOs. They were based on the moon and typically operated in groups of three. Each Interceptor carried a nuclear missile, which the three fighters fired simultaneously to create a wide area of destruction. They were designed to operate in space rather in the Earth’s atmosphere. The die-cast model measures 7” (18 cm) from top to stern, and is based on the acclaimed Sixteen 12 tooling. 

"On Moonbase Alpha the Eagles were launched from a series of landing pads. The Eagle was designed to land in middle of the red cross, where a corridor would connect to the airlock. The door in the Eagle would then connect to the travel car which ferried the crew to and from the rest of Alpha. This collector’s set consists of a landing pad and a standard Eagle transporter, in perfect scale with one another. The lights around the edge of the pad can be illuminated, the docking tube is motorised and the set produces authentic sounds and dialogue from the series. The Eagle itself is 5.5” long while the landing pad measures an impressive 18” (46 cm) across. "

The Alkesh was a mid-sized vessel that the Goa’uld used as a troop transport and as a bomber. It was capable of traveling faster than light and could enter a planet’s atmosphere, where it was often used to mount “bombing” raids using plasma charges. When it was used as a troop transport, the Jaffa were deployed using transportation rings. The model is based on the original CG asset used on the show and is 7.25” (18.5 cm) long. 

Collect Doctor Who Battles in Time with this set of five Obliterator packs. The Obliterator Set is being released in two editions. This is the Unlimited Retail Edition, which features a silver foil Obliterator logo. Each pack contains 6 randomly sorted cards* featuring high-spec UV glossed base cards, stunning rainbow foil enhanced rares, and premium holofoil super rares. PLUS with every pack there is a chance of getting one of the un-numbered, ultra rare Vortex cards, which are printed with new metallic technology. There’s only one of these in every 720 packs! There are 142 Obliterator cards to collect in total featuring characters from the Tenth Doctor right up to the latest series, including Daleks, Cybermen, monsters, villains and companions. * Cards are randomly sorted and packs are not guaranteed to contain the cards shown.

"Nine chevrons from home, and your desk finally looks the part. This extra-large desk mat puts the Ancient starship Destiny across your workspace - hull schematics, systems readouts and glowing Ancient interface panels, printed edge to edge in that unmistakable deep-space blue. It sits under your keyboard and your mouse, so the whole setup reads as one console. Why you'll want one: * Full Destiny schematic - the ship rendered as a technical blueprint, with plan, profile and detail views, exactly as the Ancients would have logged her * Ancient interface design - dials, gauges, status blocks and Ancient numerals, inspired by the control interfaces of Stargate Universe * Extra large: 31.25"" x 11.5"" - covers keyboard, mouse and the mug you shouldn't have put there * Smooth, fast mousing surface - consistent glide for work or gaming, with no snagging at the edges * Stitched edges - won't fray or peel at the corners, however hard you type * Non-slip rubber back - stays exactly where you put it, all day * Sharp, saturated print - the fine schematic linework and Ancient text stay crisp, not muddy Most Stargate collectibles live on a shelf. This one you actually use - every day, for hours, under your hands. It's the quiet kind of fandom: nobody on the video call spots it, but you know what you're flying. A proper piece of Stargate on your desk for less than the price of a boxset! A genuinely good gift for the Stargate fan who already owns the Puddle Jumper and the ZPM, and an easy first buy for anyone building a Stargate desk setup. Specifications: Dimensions: 31.25"" x 11.5"" (approx. 79cm x 29cm) Surface: Rubber, printed design Edges: Stitched Backing: Non-slip Use: Desk mat, mouse pad, keyboard mat, looking good Care: Wipe clean with a damp cloth. Do not machine wash. This is an art piece intended for display and use. It is not a toy and is not suitable for anyone under the age of 14."

"The Ma’tok staff (commonly known as a staff weapon) was the Jaffa’s weapon of choice. It is designed to fire bolts of plasma, with a range of 50-60 meters. The intensity of the blasts, which are powered by a Naquadah generator, can be adjusted so it can stun a human or blast through rock. At close quarters they were often used as a conventional staff weapon. The full-size staff was 6’ 6” (2 m) tall. The desktop replica was digitally sculpted with careful reference to the original props. It is 12” (30 cm) long and comes with a stand that can be used to display it vertically or horizontal. " Prototype images, Final Staff will be diecast for strength and hand finished.

"This is the second in a new line of detailed Stargate desktop replicas, reproducing some of the most iconic props from the classic TV series. This is a beautifully detailed replica of the helmet worn by the Horus Guard. As befits the falcon god, the helmet is designed with the fierce, hooked beak and sculpted headdress of Horus himself. The Horus Guards served Ra and later Heru'ur, and their helmets were among the first sights to greet SG-1 when they stepped through the gate to Abydos - a warning that the gods of Earth's ancient past were very much alive, and still ruling. The replica helmet was digitally sculpted, based on careful study of the original props. It has been cast in polyresin to ensure a high level of accuracy, before being painted. The helmet is the perfect size to sit on a desk or shelf and is just under 6"" (15 cm) tall when displayed on its bespoke stand."

"In Gerry Anderson’s classic 1970 series UFO, S.H.A.D.O. (Supreme Headquarters of the Alien Defense Organisation) used these all-terrain vehicles to track and intercept UFOs. The cab at the front of each mobile had seating for two, while the cabin at the rear could be used for equipment or even a command post. This stunning die-cast model uses the acclaimed Sixteen 12 tooling and features a radar dish. It is 17 cm (just under 6.75”) long and comes with an all-new forest terrain base. "

Think you know all about Star Trek: The Next Generation? This is the chance to prove it. Which crew member grew up in Alaska? Who did Data called “Grandpa”? How many decks are there on the U.S.S. Enterprise NCC-1701-D? This trivia deck is packed with hundreds of questions divided between Characters, Ships & Tech and Missions. Once you know the category, challenge your friends by choosing your level of difficulty: are you an ensign, a commander or a captain? Only the best are good enough for Starfleet. 

The VIP Eagle brought Commissioner Simmonds to Moonbase Alpha, after John Koenig discovered dangerous levels of magnetic activity. When the Alphans tried to disperse the radioactive waste that was causing the problem, Alan Carter took the VIP Eagle in to lunar orbit and was onboard when he witnessed the explosion that threw the moon out of Earth’s orbit. Unlike the standard Eagles, the VIP Eagle has a distinctive orange pod. These stunning models are based on the acclaimed Sixteen 12 tooling. This model of the VIP Eagle Transporter is 5.5 inches (13 cm) long and has a detachable pod. It is a similar size to Master Replicas’ Starship Library series.

OUR BIGGEST LIGHT-UP PANEL YET 80 × 45 cm of screen-accurate starship, backlit at the touch of a button.   This is a light-up replica of the Master Systems Display for the U.S.S. Cerritos, the California-class starship at the heart of Star Trek: Lower Decks — using the artwork created for the show by legendary Star Trek scenic artist Mike Okuda. Switched off, it’s a striking piece of Star Trek art. Switched on, it glows to life just like the displays on screen.   Why you’ll love it • Our biggest panel yet — a commanding 80 × 45 cm (31.5" × 17.7") statement piece for any wall. The U.S.S. Cerrritos MSD is the same width as the other MSDs in the collection and is designed to be displayed alongside them. • Backlit film technology — press the button and the ship’s systems glow to life, using the same technology as Star Trek: The Next Generation. • Incredible artwork — spectacular switched on, and a striking piece of art when switched off, with high-resolution detailed artwork you can study in depth. • Densely labelled, screen-used artwork — created by Mike Okuda for the TV show. The MSD shows detailed ship schematics showing the ship from starboard, above, front and back with the key systems called out: warp core, impulse reactors, shuttlebay, phaser arrays and navigational deflector. • Easter Eggs – the MSD is packed with detail including the location of Cetacean Ops and the highly-classified Rubber Ducky room. • Collector-grade and officially licensed — built to the exacting Master Replicas standard as an official Star Trek: Lower Decks collectible. • Plug in and go — ready to hang on a wall or stand on a shelf.   Specifications • Dimensions: 31.5" × 17.7" (80 × 45 cm) • Illumination: backlit film, one-button on / off • In the box: USB-C cable included (mains USB plug not included) • Mounting: wall-mountable or freestanding • Licence: officially licensed Star Trek: Lower Decks collectible by Master Replicas   This is a presale product, due to ship in December 2026.

Display your Battles in Time cards with this collector’s binder, which has been specially created for the Obliterator set. Each binder is designed to store all 142 regular cards in side-loading pockets that stop your cards from falling out and comes with a special, oversized collector's card. Look out for high-spec UV glossed base cards, stunning rainbow foil rares, premium holofoil super rares, and incredible all-new metallic technology on the ultra-chase Vortex Rare cards. Heroes, monsters and epic battles — and the perfect place to display them all.