The F-302 fighter interceptor was Earth's first fighter designed to operate in space. It was developed using alien technology that was acquired through the use of the stargates, and was armed with railguns and guided missiles. It had a hyperdrive and could make interstellar journeys.

Length: 4 inches (10 cm); Width: 8 inches (20 cm)

One of the most iconic designs in the history of Stargate. The Goa'uld used Ha'tak motherships to impose their will on the Galaxy.

These vast ships resembled giant, spaceborne pyramids and were equipped with fearsome firepower. After the fall of the Goa'uld they were operated by the Free Jaffa.

This is one of a limited number of Stargate models produced by Eaglemoss.

The model is 8 inches (20 cm) wide.

The Puddle Jumpers were Ancient ships that were used to fly through the Stargates to different locations in the Pegasus Galaxy. The Master Replicas model is based on the original VFX files that were used on Stargate Atlantis.

The model itself is just under 6 inches (15 cm) long.

Bilskirnir is Thor’s ship, which made its debut in the Stargate SG-1 season 2 episode ‘Thor’s Chariot’, when it saved SG-1 from the Goa’uld. Bilskirnir was an incredibly powerful Asgard mothership with advanced transporter systems, engines that could cover intergalactic distances in hours, and an ion gun that could obliterate a Goa’uld Hat’tak ship.

In Norse mythology 'Bilskirnir' refers to Thor’s hall, where he lived with his wife Sif and their children.

The Master Replicas die-cast model is 15cm long and is based on the original VFX model, which was supplied to us by the production team.

The California-class star of Star Trek: Lower Decks — die-cast, with a 48-page collector book.

The U.S.S. Cerritos handles second contact, engineering support and supply runs — the unglamorous missions that keep the Federation running, and where Mariner and Boimler served their time as ensigns.

Why you'll love it

• The underdog's underdog — the heart of Lower Decks, and one of Trek's most-loved modern ships.
• Designed by Eric Nyquist with Lower Decks creator Mike McMahan, finalized by Joseph Martinez and Bobby Walker.
• The 48-page collector book — its profile, annotated plans and how Star Trek: Lower Decks was made. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

The Pegasus has been out of stock for ages, but it's coming back. New stock will be available in February 2026.

The Pegasus was Admiral Caine's Battlestar in one of the rebooted series' most acclaimed story arcs. It was more advanced and powerful than theGalactica, which it massively outgunned.

Most of the design work on the ship was done by CG modeller Jose Perez who set out to make a state of the art ship that was a contrast to the older Galactica. The model is just under 10.5" (26.5 cm) long.

This is a preorder that will ship from February 2026.

The classic Constitution silhouette, reimagined for Strange New Worlds — die-cast, with a 48-page collector book.

This version of the U.S.S. Enterprise debuted at the end of Star Trek: Discovery's first season before taking center stage in Star Trek: Strange New Worlds under Captain Pike.

Why you'll love it

• A modern reimagining — Matt Jefferies' original blended with the motion-picture Enterprise and subtle nods to the NX-01. Designed by John Eaves, Scott Schneider and William Budge.
• The 48-page collector book — the ship's profile, annotated plans and the story of the design. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

Drink like a Starfleet officer with these exclusive mugs straight from the 25th century.

These brushed steel mugs would look right at home in Starfleet. Each one features the logo of a different division: Starfleet Academy in San Francisco, where generations of Starfleet officers have been trained; the Galaxy Class Starship Design Project, which was responsible for designing and building the U.S.S. Enterprise NCC-701-D; and Starfleet Headquarters itself.

The mugs were designed and created by Eaglemoss and are limited edition; exclusively available through MasterReplicas.com.

The mugs are 500ml / 17oz.

In the original series the crew regularly drank coffee from grey cups. In one of the most famous incidents, Kirk discovers that tribbles have got into his dinner, eaten his chicken sandwich and drunk his coffee.

The cups were originally made of styrofoam, whereas ours are made of earthenware. We've also added a detail that you might have missed. When the cups first appeared in 'Where No Man Has Gone Before', they featured an Enterprise logo with a wreath, but it never appeared on them again. With a little help, we sourced that logo from Gene Roddenberry's files at UCLA and have included it on our cup. The tribble is removable, so your coffee should be safe.

The XL USS Orville from Seth McFarlane's sci-fi series.

Eaglemoss only released a limited number of ships from the series, and this is the XL version of the hero ship.

The model is approximately 10.25 inches (26 cm) long.

The ships in The Expanse rely on an Epstein drive to reach the kinds of speed that make interplanetary travel practical. The drive was first tested on a second-hand yacht, and was discovered almost by accident.

This is one of the last models that Eaglemoss produced and we have them all.

Yacht length: 6 inches (16 cm); width: 4.7 inches (12 cm); height: 4.3 inches (11 cm).

This is a replica of the gate that was found on the Destiny in Stargate Universe. This gate was more primitive than the versions found in the Milky Way Galaxy and had a much shorter range. The glyphs on this gate lit up as they were dialled, and the model shows the address for Earth. The gate had been left unused for thousands of years after the crew left the Destiny, but was revived by the team from Earth, who used it to gather supplies and explore the universe. The replica gate measures 9.25 inches (23.5 cm) across. It is made of polystone and comes with a separate display base that carries the SGU logo. Master Replicas has carefully reproduced every glyph on the gate, which was based on a digital model that was supplied by MGM.

This is a light-up replica of the Master Systems Display (MSD) on the U.S.S. Defiant. The panels are designed to be hung on a wall or displayed on a shelf. They light up at the press of a button just like the displays on a starship. Even when they are off, the artwork is clearly visible, allowing you to study the ship’s systems in depth.

The light panel is 31.5" (80 cm) long and 10.25" (26 cm) high. It works in a very similar way to the real displays used on the show with backlit film.

There's nothing better to cuddle up to than this plush version of Star Trek: Lower Decks Badgey. Sure, he's a psychopath who wants to kill us all, but rendered in plush, he couldn't be cuter or cuddlier.

Badgey was originally a training hologram, who was created by Rutherford. Unfortunately, he was made using unstable AI and, after some holodeck malfunctions, he gained sentience and set out to kill his creator. Despite having his neck broken and his memory wiped, he kept coming back before eventually evolving into a digital god and heading off to create his own universe.

Badgey is the second in Master Replicas Lower Decks plush series and joins Moopsy, which is back in stock after a sell-out first run.

Order now to get the first edition, which comes with a limited-edition Badgey card.

Size: 10 inches x 5.5 inches (25 cm x 14 cm).

In the reimagined Battlestar Galactica the design of the Cylon Basestar was completely reworked. The new Basestar was an organic spaceship that was as much a being as a vehicle. It was controlled by a hybrid that could perceive things outside normal reality.

The new version was designed by artists Gary Hutzel and Eric Chu, who saw it as more advanced than the human ships.

The Eaglemoss model measures 10.25 inches (26 cm) across.

Turn your desk into the bridge of a starship with this extra large desk mat, that's designed to sit under your keyboard and mouse. The mat uses artwork created for Data's Ops station on the U.S.S. Enterprise NCC-1701-D and it's hard to resist tapping it as if you were pressing the buttons.

The mat measures 31.25" by 10". It has a rubber surface with stitched edges and a non-slip back.

One of the most terrifying sounds in the Universe is "Moopsy". At first it may sound cute but seconds after you hear it, Moopsy will drink your bones.

This large talking plush reproduces the terror perfectly. Cuddle up to Moopsy if you dare and squeeze Moopsy's paw to hear Moopsy speak.

Moopsy  briefly escaped from captivity in Narj's Miraculous Menagerarium the Star Trek: Lower Decks episode "I Have No Bones Yet I Must Flee".

At 14" long, this Moopsy is also bigger than our original plush.

Size: 14 inches (25 cm )

Turn the sound on in the video to hear Moopsy talk.

Note: When this item ships, batteries will not be included, due to rules over importation and regulations

The Viper MK VII was the modern design of fighter that was in service when the Cylons launched their attack on the 12 Colonies. It had the same basic layout as earlier models of Viper but its computer systems were vulnerable to Cylon attack. After they escaped, both the Galactica and Pegasus produced versions without the vulnerable computer systems.

The Eaglemoss model measures just over 10.5 inches (27 cm) long and features Captain Lee Adama's "Apollo" call sign on the hull.

This is an official licensed replica of the wide-bottomed Raktajino mugs that were used on Star Trek: Deep Space Nine. The mugs were produced by the replicators in the station’s replimat and only came in this distinctive blue colour. In reality, the mugs were produced by a company called Feltman Langer who were based in Los Angeles, California.

The design was known as a “No Spill No Slide” mug and they were originally sold to surf shops up and down the coast before the makers started promoting their use on boats. The Deep Space Nine art department used different mugs for different parts of the station and these were only meant for use on the Promenade.